⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Kearny County › Lakin (67860)

Lakin, KS (67860): well depth, water level & drilling cost

✓ 1,042 KGS records · Kearny County

285 ftmedian well depth
200 ft–385 fttypical depth range
120 ftmedian static water level
260 gpmmedian yield (473 tests)

Pull every recorded well near a Lakin (67860) address — $49

How deep are wells in and around Lakin (67860), Kansas?

The median drilled well depth in and around Lakin (67860) is 285 ft, based on 1,040 wells with recorded depths in the state KGS database. Half fall between 200 ft and 385 ft; 90% are shallower than 515 ft.

How much does it cost to drill a well in and around Lakin (67860)?

Applying published per-foot rates to the local median depth of 285 ft: drilling and casing alone typically runs $7,125–$18,525; a complete system including pump, pressure tank, and hookup typically runs $17,100–$28,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lakin (67860)?

The median static water level is 120 ft below ground surface (middle half of wells: 55 ft–200 ft), from 949 measurements.

Drilled depth distribution

0–50 ft 106 50–100 ft 35 100–150 ft 40 150–200 ft 69 200–300 ft 313 300–400 ft 244 400–600 ft 196 600+ ft 37
Looking at a specific property in Lakin (67860)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lakin (67860)

Free. Goes to licensed drillers working Kearny County.

Part of Kearny County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.