⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Finney County › Holcomb (67851)

Holcomb, KS (67851): well depth, water level & drilling cost

✓ 998 KGS records · Finney County

312 ftmedian well depth
260 ft–360 fttypical depth range
130 ftmedian static water level
800 gpmmedian yield (453 tests)

Pull every recorded well near a Holcomb (67851) address — $49

How deep are wells in and around Holcomb (67851), Kansas?

The median drilled well depth in and around Holcomb (67851) is 312 ft, based on 990 wells with recorded depths in the state KGS database. Half fall between 260 ft and 360 ft; 90% are shallower than 425 ft.

How much does it cost to drill a well in and around Holcomb (67851)?

Applying published per-foot rates to the local median depth of 312 ft: drilling and casing alone typically runs $7,800–$20,280; a complete system including pump, pressure tank, and hookup typically runs $18,720–$31,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Holcomb (67851)?

The median static water level is 130 ft below ground surface (middle half of wells: 92 ft–173 ft), from 918 measurements.

Drilled depth distribution

0–50 ft 22 50–100 ft 31 100–150 ft 31 150–200 ft 53 200–300 ft 246 300–400 ft 441 400–600 ft 144 600+ ft 22
Looking at a specific property in Holcomb (67851)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Holcomb (67851)

Free. Goes to licensed drillers working Finney County.

Part of Finney County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.