⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Wallace County › Wallace (67761)

Wallace, KS (67761): well depth, water level & drilling cost

✓ 136 KGS records · Wallace County

65 ftmedian well depth
34 ft–179 fttypical depth range
60 ftmedian static water level
28 gpmmedian yield (68 tests)

Pull every recorded well near a Wallace (67761) address — $49

How deep are wells in and around Wallace (67761), Kansas?

The median drilled well depth in and around Wallace (67761) is 65 ft, based on 133 wells with recorded depths in the state KGS database. Half fall between 34 ft and 179 ft; 90% are shallower than 219 ft.

How much does it cost to drill a well in and around Wallace (67761)?

Applying published per-foot rates to the local median depth of 65 ft: drilling and casing alone typically runs $1,625–$4,225; a complete system including pump, pressure tank, and hookup typically runs $3,900–$6,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wallace (67761)?

The median static water level is 60 ft below ground surface (middle half of wells: 16 ft–126 ft), from 119 measurements.

Drilled depth distribution

0–50 ft 64 50–100 ft 9 100–150 ft 20 150–200 ft 15 200–300 ft 25 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Wallace (67761)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wallace (67761)

Free. Goes to licensed drillers working Wallace County.

Part of Wallace County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.