⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Graham County › Penokee (67659)

Penokee, KS (67659): well depth, water level & drilling cost

✓ 198 KGS records · Graham County

60 ftmedian well depth
40 ft–111 fttypical depth range
30 ftmedian static water level
30 gpmmedian yield (87 tests)

Pull every recorded well near a Penokee (67659) address — $49

How deep are wells in and around Penokee (67659), Kansas?

The median drilled well depth in and around Penokee (67659) is 60 ft, based on 195 wells with recorded depths in the state KGS database. Half fall between 40 ft and 111 ft; 90% are shallower than 153 ft.

How much does it cost to drill a well in and around Penokee (67659)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Penokee (67659)?

The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–67 ft), from 162 measurements.

Drilled depth distribution

0–50 ft 77 50–100 ft 60 100–150 ft 35 150–200 ft 11 200–300 ft 12 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Penokee (67659)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Penokee (67659)

Free. Goes to licensed drillers working Graham County.

Part of Graham County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.