⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Phillips County › Logan (67646)

Logan, KS (67646): well depth, water level & drilling cost

✓ 232 KGS records · Phillips County

58 ftmedian well depth
40 ft–83 fttypical depth range
27 ftmedian static water level
15 gpmmedian yield (109 tests)

Pull every recorded well near a Logan (67646) address — $49

How deep are wells in and around Logan (67646), Kansas?

The median drilled well depth in and around Logan (67646) is 58 ft, based on 231 wells with recorded depths in the state KGS database. Half fall between 40 ft and 83 ft; 90% are shallower than 115 ft.

How much does it cost to drill a well in and around Logan (67646)?

Applying published per-foot rates to the local median depth of 58 ft: drilling and casing alone typically runs $1,450–$3,770; a complete system including pump, pressure tank, and hookup typically runs $3,480–$5,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Logan (67646)?

The median static water level is 27 ft below ground surface (middle half of wells: 19 ft–47 ft), from 197 measurements.

Drilled depth distribution

0–50 ft 88 50–100 ft 109 100–150 ft 21 150–200 ft 12 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Logan (67646)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Logan (67646)

Free. Goes to licensed drillers working Phillips County.

Part of Phillips County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.