⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Graham County › Hill City (67642)

Hill City, KS (67642): well depth, water level & drilling cost

✓ 249 KGS records · Graham County

70 ftmedian well depth
47 ft–120 fttypical depth range
39 ftmedian static water level
25 gpmmedian yield (97 tests)

Pull every recorded well near a Hill City (67642) address — $49

How deep are wells in and around Hill City (67642), Kansas?

The median drilled well depth in and around Hill City (67642) is 70 ft, based on 243 wells with recorded depths in the state KGS database. Half fall between 47 ft and 120 ft; 90% are shallower than 178 ft.

How much does it cost to drill a well in and around Hill City (67642)?

Applying published per-foot rates to the local median depth of 70 ft: drilling and casing alone typically runs $1,750–$4,550; a complete system including pump, pressure tank, and hookup typically runs $4,200–$7,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hill City (67642)?

The median static water level is 39 ft below ground surface (middle half of wells: 23 ft–69 ft), from 197 measurements.

Drilled depth distribution

0–50 ft 62 50–100 ft 96 100–150 ft 42 150–200 ft 32 200–300 ft 10 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Hill City (67642)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hill City (67642)

Free. Goes to licensed drillers working Graham County.

Part of Graham County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.