⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Mcpherson County › Inman (67546)

Inman, KS (67546): well depth, water level & drilling cost

✓ 530 KGS records · Mcpherson County

100 ftmedian well depth
70 ft–128 fttypical depth range
30 ftmedian static water level
30 gpmmedian yield (284 tests)

Pull every recorded well near a Inman (67546) address — $49

How deep are wells in and around Inman (67546), Kansas?

The median drilled well depth in and around Inman (67546) is 100 ft, based on 529 wells with recorded depths in the state KGS database. Half fall between 70 ft and 128 ft; 90% are shallower than 174 ft.

How much does it cost to drill a well in and around Inman (67546)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Inman (67546)?

The median static water level is 30 ft below ground surface (middle half of wells: 17 ft–41 ft), from 510 measurements.

Drilled depth distribution

0–50 ft 33 50–100 ft 229 100–150 ft 185 150–200 ft 53 200–300 ft 29 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Inman (67546)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Inman (67546)

Free. Goes to licensed drillers working Mcpherson County.

Part of Mcpherson County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.