⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Ellsworth County › Wilson (67490)

Wilson, KS (67490): well depth, water level & drilling cost

✓ 243 KGS records · Ellsworth County

105 ftmedian well depth
64 ft–178 fttypical depth range
60 ftmedian static water level
16 gpmmedian yield (164 tests)

Pull every recorded well near a Wilson (67490) address — $49

How deep are wells in and around Wilson (67490), Kansas?

The median drilled well depth in and around Wilson (67490) is 105 ft, based on 242 wells with recorded depths in the state KGS database. Half fall between 64 ft and 178 ft; 90% are shallower than 257 ft.

How much does it cost to drill a well in and around Wilson (67490)?

Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wilson (67490)?

The median static water level is 60 ft below ground surface (middle half of wells: 38 ft–107 ft), from 229 measurements.

Drilled depth distribution

0–50 ft 29 50–100 ft 78 100–150 ft 54 150–200 ft 30 200–300 ft 41 300–400 ft 10 400–600 ft 0 600+ ft 0
Looking at a specific property in Wilson (67490)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wilson (67490)

Free. Goes to licensed drillers working Ellsworth County.

Part of Ellsworth County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.