⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Marion County › Tampa (67483)

Tampa, KS (67483): well depth, water level & drilling cost

✓ 89 KGS records · Marion County

65 ftmedian well depth
52 ft–72 fttypical depth range
25 ftmedian static water level
19 gpmmedian yield (79 tests)

Pull every recorded well near a Tampa (67483) address — $49

How deep are wells in and around Tampa (67483), Kansas?

The median drilled well depth in and around Tampa (67483) is 65 ft, based on 89 wells with recorded depths in the state KGS database. Half fall between 52 ft and 72 ft; 90% are shallower than 88 ft.

How much does it cost to drill a well in and around Tampa (67483)?

Applying published per-foot rates to the local median depth of 65 ft: drilling and casing alone typically runs $1,625–$4,225; a complete system including pump, pressure tank, and hookup typically runs $3,900–$6,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Tampa (67483)?

The median static water level is 25 ft below ground surface (middle half of wells: 18 ft–34 ft), from 88 measurements.

Drilled depth distribution

0–50 ft 15 50–100 ft 69 100–150 ft 5 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Tampa (67483)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Tampa (67483)

Free. Goes to licensed drillers working Marion County.

Part of Marion County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.