⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Mitchell County › Simpson (67478)

Simpson, KS (67478): well depth, water level & drilling cost

✓ 58 KGS records · Mitchell County

68 ftmedian well depth
49 ft–160 fttypical depth range
36 ftmedian static water level
11 gpmmedian yield (48 tests)

Pull every recorded well near a Simpson (67478) address — $49

How deep are wells in and around Simpson (67478), Kansas?

The median drilled well depth in and around Simpson (67478) is 68 ft, based on 58 wells with recorded depths in the state KGS database. Half fall between 49 ft and 160 ft; 90% are shallower than 182 ft.

How much does it cost to drill a well in and around Simpson (67478)?

Applying published per-foot rates to the local median depth of 68 ft: drilling and casing alone typically runs $1,700–$4,420; a complete system including pump, pressure tank, and hookup typically runs $4,080–$6,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Simpson (67478)?

The median static water level is 36 ft below ground surface (middle half of wells: 25 ft–100 ft), from 54 measurements.

Drilled depth distribution

0–50 ft 15 50–100 ft 17 100–150 ft 5 150–200 ft 18 200–300 ft 3 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Simpson (67478)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Simpson (67478)

Free. Goes to licensed drillers working Mitchell County.

Part of Mitchell County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.