⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Mcpherson County › Mcpherson (67460)

Mcpherson, KS (67460): well depth, water level & drilling cost

✓ 756 KGS records · Mcpherson County

120 ftmedian well depth
89 ft–148 fttypical depth range
70 ftmedian static water level
40 gpmmedian yield (508 tests)

Pull every recorded well near a Mcpherson (67460) address — $49

How deep are wells in and around Mcpherson (67460), Kansas?

The median drilled well depth in and around Mcpherson (67460) is 120 ft, based on 753 wells with recorded depths in the state KGS database. Half fall between 89 ft and 148 ft; 90% are shallower than 184 ft.

How much does it cost to drill a well in and around Mcpherson (67460)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mcpherson (67460)?

The median static water level is 70 ft below ground surface (middle half of wells: 48 ft–86 ft), from 706 measurements.

Drilled depth distribution

0–50 ft 24 50–100 ft 227 100–150 ft 315 150–200 ft 133 200–300 ft 54 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Mcpherson (67460)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mcpherson (67460)

Free. Goes to licensed drillers working Mcpherson County.

Part of Mcpherson County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.