⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Saline County › Gypsum (67448)

Gypsum, KS (67448): well depth, water level & drilling cost

✓ 208 KGS records · Saline County

50 ftmedian well depth
39 ft–62 fttypical depth range
19 ftmedian static water level
13 gpmmedian yield (140 tests)

Pull every recorded well near a Gypsum (67448) address — $49

How deep are wells in and around Gypsum (67448), Kansas?

The median drilled well depth in and around Gypsum (67448) is 50 ft, based on 208 wells with recorded depths in the state KGS database. Half fall between 39 ft and 62 ft; 90% are shallower than 76 ft.

How much does it cost to drill a well in and around Gypsum (67448)?

Applying published per-foot rates to the local median depth of 50 ft: drilling and casing alone typically runs $1,250–$3,250; a complete system including pump, pressure tank, and hookup typically runs $3,000–$5,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gypsum (67448)?

The median static water level is 19 ft below ground surface (middle half of wells: 12 ft–30 ft), from 197 measurements.

Drilled depth distribution

0–50 ft 100 50–100 ft 101 100–150 ft 7 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Gypsum (67448)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gypsum (67448)

Free. Goes to licensed drillers working Saline County.

Part of Saline County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.