⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Lincoln County › Barnard (67418)

Barnard, KS (67418): well depth, water level & drilling cost

✓ 154 KGS records · Lincoln County

100 ftmedian well depth
65 ft–155 fttypical depth range
55 ftmedian static water level
18 gpmmedian yield (137 tests)

Pull every recorded well near a Barnard (67418) address — $49

How deep are wells in and around Barnard (67418), Kansas?

The median drilled well depth in and around Barnard (67418) is 100 ft, based on 154 wells with recorded depths in the state KGS database. Half fall between 65 ft and 155 ft; 90% are shallower than 224 ft.

How much does it cost to drill a well in and around Barnard (67418)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Barnard (67418)?

The median static water level is 55 ft below ground surface (middle half of wells: 26 ft–96 ft), from 151 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 67 100–150 ft 37 150–200 ft 21 200–300 ft 18 300–400 ft 3 400–600 ft 0 600+ ft 0
Looking at a specific property in Barnard (67418)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Barnard (67418)

Free. Goes to licensed drillers working Lincoln County.

Part of Lincoln County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.