⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Butler County › Potwin (67123)

Potwin, KS (67123): well depth, water level & drilling cost

✓ 140 KGS records · Butler County

100 ftmedian well depth
75 ft–122 fttypical depth range
30 ftmedian static water level
25 gpmmedian yield (107 tests)

Pull every recorded well near a Potwin (67123) address — $49

How deep are wells in and around Potwin (67123), Kansas?

The median drilled well depth in and around Potwin (67123) is 100 ft, based on 139 wells with recorded depths in the state KGS database. Half fall between 75 ft and 122 ft; 90% are shallower than 141 ft.

How much does it cost to drill a well in and around Potwin (67123)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Potwin (67123)?

The median static water level is 30 ft below ground surface (middle half of wells: 21 ft–40 ft), from 133 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 51 100–150 ft 71 150–200 ft 6 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Potwin (67123)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Potwin (67123)

Free. Goes to licensed drillers working Butler County.

Part of Butler County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.