⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Sedgwick County › Peck (67120)

Peck, KS (67120): well depth, water level & drilling cost

✓ 1,018 KGS records · Sedgwick County

45 ftmedian well depth
36 ft–60 fttypical depth range
15 ftmedian static water level
30 gpmmedian yield (297 tests)

Pull every recorded well near a Peck (67120) address — $49

How deep are wells in and around Peck (67120), Kansas?

The median drilled well depth in and around Peck (67120) is 45 ft, based on 1,009 wells with recorded depths in the state KGS database. Half fall between 36 ft and 60 ft; 90% are shallower than 65 ft.

How much does it cost to drill a well in and around Peck (67120)?

Applying published per-foot rates to the local median depth of 45 ft: drilling and casing alone typically runs $1,125–$2,925; a complete system including pump, pressure tank, and hookup typically runs $2,700–$4,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Peck (67120)?

The median static water level is 15 ft below ground surface (middle half of wells: 12 ft–20 ft), from 1,000 measurements.

Drilled depth distribution

0–50 ft 574 50–100 ft 428 100–150 ft 7 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Peck (67120)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Peck (67120)

Free. Goes to licensed drillers working Sedgwick County.

Part of Sedgwick County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.