⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Harvey County › Newton (67114)

Newton, KS (67114): well depth, water level & drilling cost

✓ 930 KGS records · Harvey County

79 ftmedian well depth
60 ft–91 fttypical depth range
20 ftmedian static water level
18 gpmmedian yield (733 tests)

Pull every recorded well near a Newton (67114) address — $49

How deep are wells in and around Newton (67114), Kansas?

The median drilled well depth in and around Newton (67114) is 79 ft, based on 928 wells with recorded depths in the state KGS database. Half fall between 60 ft and 91 ft; 90% are shallower than 103 ft.

How much does it cost to drill a well in and around Newton (67114)?

Applying published per-foot rates to the local median depth of 79 ft: drilling and casing alone typically runs $1,975–$5,135; a complete system including pump, pressure tank, and hookup typically runs $4,740–$7,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Newton (67114)?

The median static water level is 20 ft below ground surface (middle half of wells: 15 ft–25 ft), from 889 measurements.

Drilled depth distribution

0–50 ft 143 50–100 ft 630 100–150 ft 153 150–200 ft 2 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Newton (67114)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Newton (67114)

Free. Goes to licensed drillers working Harvey County.

Part of Harvey County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.