⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Kingman County › Kingman (67068)

Kingman, KS (67068): well depth, water level & drilling cost

✓ 695 KGS records · Kingman County

63 ftmedian well depth
49 ft–86 fttypical depth range
22 ftmedian static water level
20 gpmmedian yield (429 tests)

Pull every recorded well near a Kingman (67068) address — $49

How deep are wells in and around Kingman (67068), Kansas?

The median drilled well depth in and around Kingman (67068) is 63 ft, based on 692 wells with recorded depths in the state KGS database. Half fall between 49 ft and 86 ft; 90% are shallower than 119 ft.

How much does it cost to drill a well in and around Kingman (67068)?

Applying published per-foot rates to the local median depth of 63 ft: drilling and casing alone typically runs $1,575–$4,095; a complete system including pump, pressure tank, and hookup typically runs $3,780–$6,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kingman (67068)?

The median static water level is 22 ft below ground surface (middle half of wells: 14 ft–36 ft), from 682 measurements.

Drilled depth distribution

0–50 ft 176 50–100 ft 396 100–150 ft 107 150–200 ft 13 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Kingman (67068)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kingman (67068)

Free. Goes to licensed drillers working Kingman County.

Part of Kingman County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.