⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Butler County › Douglass (67039)

Douglass, KS (67039): well depth, water level & drilling cost

✓ 262 KGS records · Butler County

105 ftmedian well depth
83 ft–145 fttypical depth range
30 ftmedian static water level
18 gpmmedian yield (161 tests)

Pull every recorded well near a Douglass (67039) address — $49

How deep are wells in and around Douglass (67039), Kansas?

The median drilled well depth in and around Douglass (67039) is 105 ft, based on 260 wells with recorded depths in the state KGS database. Half fall between 83 ft and 145 ft; 90% are shallower than 183 ft.

How much does it cost to drill a well in and around Douglass (67039)?

Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Douglass (67039)?

The median static water level is 30 ft below ground surface (middle half of wells: 23 ft–40 ft), from 251 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 103 100–150 ft 91 150–200 ft 50 200–300 ft 11 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Douglass (67039)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Douglass (67039)

Free. Goes to licensed drillers working Butler County.

Part of Butler County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.