⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Sumner County › Conway Springs (67031)

Conway Springs, KS (67031): well depth, water level & drilling cost

✓ 297 KGS records · Sumner County

72 ftmedian well depth
56 ft–80 fttypical depth range
19 ftmedian static water level
20 gpmmedian yield (85 tests)

Pull every recorded well near a Conway Springs (67031) address — $49

How deep are wells in and around Conway Springs (67031), Kansas?

The median drilled well depth in and around Conway Springs (67031) is 72 ft, based on 297 wells with recorded depths in the state KGS database. Half fall between 56 ft and 80 ft; 90% are shallower than 100 ft.

How much does it cost to drill a well in and around Conway Springs (67031)?

Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Conway Springs (67031)?

The median static water level is 19 ft below ground surface (middle half of wells: 15 ft–25 ft), from 289 measurements.

Drilled depth distribution

0–50 ft 35 50–100 ft 230 100–150 ft 32 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Conway Springs (67031)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Conway Springs (67031)

Free. Goes to licensed drillers working Sumner County.

Part of Sumner County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.