⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Butler County › Andover (67002)

Andover, KS (67002): well depth, water level & drilling cost

✓ 1,687 KGS records · Butler County

100 ftmedian well depth
90 ft–120 fttypical depth range
35 ftmedian static water level
20 gpmmedian yield (742 tests)

Pull every recorded well near a Andover (67002) address — $49

How deep are wells in and around Andover (67002), Kansas?

The median drilled well depth in and around Andover (67002) is 100 ft, based on 1,683 wells with recorded depths in the state KGS database. Half fall between 90 ft and 120 ft; 90% are shallower than 123 ft.

How much does it cost to drill a well in and around Andover (67002)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Andover (67002)?

The median static water level is 35 ft below ground surface (middle half of wells: 28 ft–50 ft), from 1,575 measurements.

Drilled depth distribution

0–50 ft 18 50–100 ft 663 100–150 ft 972 150–200 ft 29 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Andover (67002)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Andover (67002)

Free. Goes to licensed drillers working Butler County.

Part of Butler County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.