⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Jewell County › Burr Oak (66936)

Burr Oak, KS (66936): well depth, water level & drilling cost

✓ 108 KGS records · Jewell County

115 ftmedian well depth
60 ft–160 fttypical depth range
43 ftmedian static water level
20 gpmmedian yield (85 tests)

Pull every recorded well near a Burr Oak (66936) address — $49

How deep are wells in and around Burr Oak (66936), Kansas?

The median drilled well depth in and around Burr Oak (66936) is 115 ft, based on 107 wells with recorded depths in the state KGS database. Half fall between 60 ft and 160 ft; 90% are shallower than 178 ft.

How much does it cost to drill a well in and around Burr Oak (66936)?

Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Burr Oak (66936)?

The median static water level is 43 ft below ground surface (middle half of wells: 23 ft–60 ft), from 105 measurements.

Drilled depth distribution

0–50 ft 15 50–100 ft 35 100–150 ft 27 150–200 ft 28 200–300 ft 2 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Burr Oak (66936)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Burr Oak (66936)

Free. Goes to licensed drillers working Jewell County.

Part of Jewell County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.