⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Chase County › Elmdale (66850)

Elmdale, KS (66850): well depth, water level & drilling cost

✓ 106 KGS records · Chase County

50 ftmedian well depth
42 ft–74 fttypical depth range
20 ftmedian static water level
10 gpmmedian yield (87 tests)

Pull every recorded well near a Elmdale (66850) address — $49

How deep are wells in and around Elmdale (66850), Kansas?

The median drilled well depth in and around Elmdale (66850) is 50 ft, based on 106 wells with recorded depths in the state KGS database. Half fall between 42 ft and 74 ft; 90% are shallower than 118 ft.

How much does it cost to drill a well in and around Elmdale (66850)?

Applying published per-foot rates to the local median depth of 50 ft: drilling and casing alone typically runs $1,250–$3,250; a complete system including pump, pressure tank, and hookup typically runs $3,000–$5,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elmdale (66850)?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–26 ft), from 100 measurements.

Drilled depth distribution

0–50 ft 43 50–100 ft 47 100–150 ft 13 150–200 ft 3 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Elmdale (66850)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elmdale (66850)

Free. Goes to licensed drillers working Chase County.

Part of Chase County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.