⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Geary County › Milford (66514)

Milford, KS (66514): well depth, water level & drilling cost

✓ 175 KGS records · Geary County

130 ftmedian well depth
110 ft–147 fttypical depth range
71 ftmedian static water level
20 gpmmedian yield (149 tests)

Pull every recorded well near a Milford (66514) address — $49

How deep are wells in and around Milford (66514), Kansas?

The median drilled well depth in and around Milford (66514) is 130 ft, based on 175 wells with recorded depths in the state KGS database. Half fall between 110 ft and 147 ft; 90% are shallower than 160 ft.

How much does it cost to drill a well in and around Milford (66514)?

Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milford (66514)?

The median static water level is 71 ft below ground surface (middle half of wells: 60 ft–90 ft), from 164 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 16 100–150 ft 109 150–200 ft 42 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Milford (66514)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milford (66514)

Free. Goes to licensed drillers working Geary County.

Part of Geary County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.