⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Jackson County › Hoyt (66440)

Hoyt, KS (66440): well depth, water level & drilling cost

✓ 86 KGS records · Jackson County

96 ftmedian well depth
46 ft–140 fttypical depth range
17 ftmedian static water level
5 gpmmedian yield (73 tests)

Pull every recorded well near a Hoyt (66440) address — $49

How deep are wells in and around Hoyt (66440), Kansas?

The median drilled well depth in and around Hoyt (66440) is 96 ft, based on 86 wells with recorded depths in the state KGS database. Half fall between 46 ft and 140 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Hoyt (66440)?

Applying published per-foot rates to the local median depth of 96 ft: drilling and casing alone typically runs $2,400–$6,240; a complete system including pump, pressure tank, and hookup typically runs $5,760–$9,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hoyt (66440)?

The median static water level is 17 ft below ground surface (middle half of wells: 12 ft–60 ft), from 84 measurements.

Drilled depth distribution

0–50 ft 22 50–100 ft 21 100–150 ft 23 150–200 ft 10 200–300 ft 10 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Hoyt (66440)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hoyt (66440)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.