⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Marshall County › Frankfort (66427)

Frankfort, KS (66427): well depth, water level & drilling cost

✓ 110 KGS records · Marshall County

100 ftmedian well depth
61 ft–120 fttypical depth range
37 ftmedian static water level
20 gpmmedian yield (88 tests)

Pull every recorded well near a Frankfort (66427) address — $49

How deep are wells in and around Frankfort (66427), Kansas?

The median drilled well depth in and around Frankfort (66427) is 100 ft, based on 110 wells with recorded depths in the state KGS database. Half fall between 61 ft and 120 ft; 90% are shallower than 142 ft.

How much does it cost to drill a well in and around Frankfort (66427)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Frankfort (66427)?

The median static water level is 37 ft below ground surface (middle half of wells: 21 ft–57 ft), from 104 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 41 100–150 ft 47 150–200 ft 7 200–300 ft 3 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Frankfort (66427)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Frankfort (66427)

Free. Goes to licensed drillers working Marshall County.

Part of Marshall County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.