⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Douglas County › Wellsville (66092)

Wellsville, KS (66092): well depth, water level & drilling cost

✓ 154 KGS records · Douglas County

100 ftmedian well depth
75 ft–116 fttypical depth range
30 ftmedian static water level
12 gpmmedian yield (93 tests)

Pull every recorded well near a Wellsville (66092) address — $49

How deep are wells in and around Wellsville (66092), Kansas?

The median drilled well depth in and around Wellsville (66092) is 100 ft, based on 153 wells with recorded depths in the state KGS database. Half fall between 75 ft and 116 ft; 90% are shallower than 164 ft.

How much does it cost to drill a well in and around Wellsville (66092)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wellsville (66092)?

The median static water level is 30 ft below ground surface (middle half of wells: 17 ft–40 ft), from 117 measurements.

Drilled depth distribution

0–50 ft 16 50–100 ft 54 100–150 ft 60 150–200 ft 9 200–300 ft 7 300–400 ft 0 400–600 ft 0 600+ ft 7
Looking at a specific property in Wellsville (66092)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wellsville (66092)

Free. Goes to licensed drillers working Douglas County.

Part of Douglas County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.