⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Leavenworth County › Leavenworth (66048)

Leavenworth, KS (66048): well depth, water level & drilling cost

✓ 57 KGS records · Leavenworth County

120 ftmedian well depth
84 ft–146 fttypical depth range
30 ftmedian static water level
2 gpmmedian yield (43 tests)

Pull every recorded well near a Leavenworth (66048) address — $49

How deep are wells in and around Leavenworth (66048), Kansas?

The median drilled well depth in and around Leavenworth (66048) is 120 ft, based on 56 wells with recorded depths in the state KGS database. Half fall between 84 ft and 146 ft; 90% are shallower than 260 ft.

How much does it cost to drill a well in and around Leavenworth (66048)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Leavenworth (66048)?

The median static water level is 30 ft below ground surface (middle half of wells: 15 ft–60 ft), from 51 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 8 100–150 ft 26 150–200 ft 1 200–300 ft 11 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Leavenworth (66048)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Leavenworth (66048)

Free. Goes to licensed drillers working Leavenworth County.

Part of Leavenworth County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.