⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Leavenworth County › Lansing (66043)

Lansing, KS (66043): well depth, water level & drilling cost

✓ 109 KGS records · Leavenworth County

100 ftmedian well depth
75 ft–130 fttypical depth range
27 ftmedian static water level
7 gpmmedian yield (95 tests)

Pull every recorded well near a Lansing (66043) address — $49

How deep are wells in and around Lansing (66043), Kansas?

The median drilled well depth in and around Lansing (66043) is 100 ft, based on 108 wells with recorded depths in the state KGS database. Half fall between 75 ft and 130 ft; 90% are shallower than 160 ft.

How much does it cost to drill a well in and around Lansing (66043)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lansing (66043)?

The median static water level is 27 ft below ground surface (middle half of wells: 13 ft–50 ft), from 100 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 35 100–150 ft 52 150–200 ft 10 200–300 ft 4 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Lansing (66043)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lansing (66043)

Free. Goes to licensed drillers working Leavenworth County.

Part of Leavenworth County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.