⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Leavenworth County › Bonner Springs (66012)

Bonner Springs, KS (66012): well depth, water level & drilling cost

✓ 158 KGS records · Leavenworth County

80 ftmedian well depth
59 ft–108 fttypical depth range
31 ftmedian static water level
5 gpmmedian yield (103 tests)

Pull every recorded well near a Bonner Springs (66012) address — $49

How deep are wells in and around Bonner Springs (66012), Kansas?

The median drilled well depth in and around Bonner Springs (66012) is 80 ft, based on 158 wells with recorded depths in the state KGS database. Half fall between 59 ft and 108 ft; 90% are shallower than 150 ft.

How much does it cost to drill a well in and around Bonner Springs (66012)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bonner Springs (66012)?

The median static water level is 31 ft below ground surface (middle half of wells: 20 ft–47 ft), from 143 measurements.

Drilled depth distribution

0–50 ft 19 50–100 ft 81 100–150 ft 41 150–200 ft 11 200–300 ft 5 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Bonner Springs (66012)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bonner Springs (66012)

Free. Goes to licensed drillers working Leavenworth County.

Part of Leavenworth County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.