⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Leavenworth County › Basehor (66007)

Basehor, KS (66007): well depth, water level & drilling cost

✓ 413 KGS records · Leavenworth County

100 ftmedian well depth
85 ft–132 fttypical depth range
35 ftmedian static water level
8 gpmmedian yield (373 tests)

Pull every recorded well near a Basehor (66007) address — $49

How deep are wells in and around Basehor (66007), Kansas?

The median drilled well depth in and around Basehor (66007) is 100 ft, based on 412 wells with recorded depths in the state KGS database. Half fall between 85 ft and 132 ft; 90% are shallower than 150 ft.

How much does it cost to drill a well in and around Basehor (66007)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Basehor (66007)?

The median static water level is 35 ft below ground surface (middle half of wells: 25 ft–52 ft), from 389 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 122 100–150 ft 229 150–200 ft 44 200–300 ft 4 300–400 ft 0 400–600 ft 0 600+ ft 1
Looking at a specific property in Basehor (66007)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Basehor (66007)

Free. Goes to licensed drillers working Leavenworth County.

Part of Leavenworth County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.