⟁ Kansas Well Data field records · 2026 survey

Kansas Well Data › Douglas County › Baldwin City (66006)

Baldwin City, KS (66006): well depth, water level & drilling cost

✓ 469 KGS records · Douglas County

117 ftmedian well depth
97 ft–150 fttypical depth range
40 ftmedian static water level
12 gpmmedian yield (351 tests)

Pull every recorded well near a Baldwin City (66006) address — $49

How deep are wells in and around Baldwin City (66006), Kansas?

The median drilled well depth in and around Baldwin City (66006) is 117 ft, based on 469 wells with recorded depths in the state KGS database. Half fall between 97 ft and 150 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Baldwin City (66006)?

Applying published per-foot rates to the local median depth of 117 ft: drilling and casing alone typically runs $2,925–$7,605; a complete system including pump, pressure tank, and hookup typically runs $7,020–$11,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Baldwin City (66006)?

The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–60 ft), from 440 measurements.

Drilled depth distribution

0–50 ft 32 50–100 ft 90 100–150 ft 219 150–200 ft 70 200–300 ft 47 300–400 ft 10 400–600 ft 1 600+ ft 0
Looking at a specific property in Baldwin City (66006)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Baldwin City (66006)

Free. Goes to licensed drillers working Douglas County.

Part of Douglas County well records.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.