Kansas Well Data field records · 2026 survey

Kansas Well Data › Wabaunsee County

Wabaunsee County, Kansas: well depth, water level & drilling cost

✓ 854 KGS records · verified 2026-09-22

75 ftmedian well depth
50 ft–100 fttypical depth range
28 ftmedian static water level
15 gpmmedian yield (705 tests)

Pull every recorded well near a Wabaunsee County address — $49

How deep are wells in Wabaunsee County, Kansas?

The median drilled well depth in Wabaunsee County is 75 ft, based on 853 wells with recorded depths in the state KGS database. Half of all wells fall between 50 ft and 100 ft; 90% are shallower than 140 ft. Wells drilled since 2016 have a median depth of 100 ft.

How much does it cost to drill a well in Wabaunsee County?

Applying published per-foot rates to the local median depth of 75 ft: drilling and casing alone typically runs $1,875–$4,875; a complete system including pump, pressure tank, and hookup typically runs $4,500–$7,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Wabaunsee County?

The median static water level is 28 ft below ground surface (middle half of wells: 17 ft–50 ft), from 821 measurements.

How much water do wells in Wabaunsee County produce?

The median tested yield is 15 gpm (middle half: 5 gpm–30 gpm), from 705 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 211 50–100 ft 352 100–150 ft 239 150–200 ft 43 200–300 ft 8 300–400 ft 0 400–600 ft 0 600+ ft 0

Who drills wells in Wabaunsee County?

Contractors by number of wells completed in this county since 2016, per WWC-5 water well records filed with the Kansas Geological Survey.

DrillerWells since 2016
Associated Drilling, Inc.36
Associated Drilling, Inc. #99017
Haldeman Well Drilling & Pump Service13
Flint Hills Drilling #91412
Flint Hills Drlg #91412
Flint Hills Drilling10
Haldeman Well Drlg. & Pump9
Zinn Water Well Drig.5

See every driller with wells on record in Wabaunsee County, ranked →

Get quotes from local drillers

Looking at a specific property in Wabaunsee County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Wabaunsee County

Free. Goes to licensed drillers working Wabaunsee County.

Well records by ZIP code in Wabaunsee County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.