Kansas Well Data field records · 2026 survey

Kansas Well Data › Stanton County

Stanton County, Kansas: well depth, water level & drilling cost

✓ 866 KGS records · verified 2026-09-22

440 ftmedian well depth
350 ft–575 fttypical depth range
226 ftmedian static water level
120 gpmmedian yield (526 tests)

Pull every recorded well near a Stanton County address — $49

How deep are wells in Stanton County, Kansas?

The median drilled well depth in Stanton County is 440 ft, based on 864 wells with recorded depths in the state KGS database. Half of all wells fall between 350 ft and 575 ft; 90% are shallower than 628 ft. Wells drilled since 2016 have a median depth of 565 ft.

How much does it cost to drill a well in Stanton County?

Applying published per-foot rates to the local median depth of 440 ft: drilling and casing alone typically runs $11,000–$28,600; a complete system including pump, pressure tank, and hookup typically runs $26,400–$44,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Stanton County?

The median static water level is 226 ft below ground surface (middle half of wells: 180 ft–293 ft), from 823 measurements.

How much water do wells in Stanton County produce?

The median tested yield is 120 gpm (middle half: 40 gpm–1,000 gpm), from 526 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 0 50–100 ft 8 100–150 ft 5 150–200 ft 13 200–300 ft 92 300–400 ft 207 400–600 ft 372 600+ ft 167

Who drills wells in Stanton County?

Contractors by number of wells completed in this county since 2016, per WWC-5 water well records filed with the Kansas Geological Survey.

DrillerWells since 2016
Hydro Resources Mid Continent, Inc.27
Nash Water Well Service, LLC24
Downey Drilling, Inc.15
Nash WW Srvc9
Downey Drlg #7489
Hydro Res. Mid Continent #1457
Steve's Drilling2
SW Windmill & WW Srvc2

See every driller with wells on record in Stanton County, ranked →

Get quotes from local drillers

Looking at a specific property in Stanton County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Stanton County

Free. Goes to licensed drillers working Stanton County.

Well records by ZIP code in Stanton County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from KGS records (WWC-5 water well records; monitoring, environmental, geothermal and test holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.